How To Remove Stains From Bathroom Tiles?


Are you tired of using some powerful cleaning products to remove stains on your bathroom tiles? And you are looking for a perfect solution. Don’t worry, in this article, we have rounded up some easy ways to remove hard stains from bathroom tiles.

Introduction

Keeping our bathrooms clean is of vital importance to hygiene for us and our family. It includes showers, baths, sinks, and bathroom tiles. Bathrooms are more than just another space in your home.

If properly maintained, your bathroom may easily transform into your private mini spa, whether it’s for a short morning shower or a luxurious weekend bath. Even in a crowded house, restrooms can provide you with a little break and much-needed privacy for a short period of time.

Unfortunately, this is one of the areas that collect more dirt and germs than any other, particularly due to the tiles. As a result, learning a few cleaning tips and methods for bathroom tiles can be beneficial. It is necessary for your family’s health and well-being.

Why Do Stains Occur?

Stains come because of the nature of the room. Since the bathroom is a place that is frequently exposed to damp and moist conditions, it is a perfect place for germs to thrive. stains and moulds appear frequently because they are caused by various types of bacteria. If we don’t deal with this problem immediately, it may spread throughout the rest of the house.

Hard Water Stains

The brown-colored stains are due to hard water. These stains are very difficult to remove and it steals away the aesthetic appeal of our bathroom.

The reason for this is that bathrooms accumulate a lot of water on a daily basis. These stains are nearly tough to remove, no matter how expensive the cleaning products are.

Hard water stains of bathroom floors
Hard water stains of bathroom floors

Hard water is caused by a high concentration of calcium and magnesium. When water evaporates in your bathroom or elsewhere, it leaves a very thin film on the bathroom tiles. This ultra-thin coating of calcium and magnesium is initially undetectable on your bathroom’s surface.

When we don’t clear the deposits on a regular basis, the dirt particles mix with new mineral crystals every time you shower. We’ll eventually have a layer of hard water deposits and grime, which will leave dark stains all over the bathroom.

How To Remove Stains From Bathroom Tiles

Here are some natural ways to remove stains from bathroom tiles.

1. Saline Solution:

If we sprinkle some salt on the floor or walls to clean the tiles and let it for at least an hour, after that, we can scrape the salt away using a brush.

The more time the salt is left on the limescale, the more effective it becomes. Make a saline solution and spray it over the surface of glass and mirrors.

Clean the solution with a clean, dry cloth in circular motions after half an hour. To eliminate salt residue, raise the surface. Salt functions as a scouring agent in this situation, removing limescale buildup.

Removal of stains from bathroom tiles

2. White Vinegar:

Vinegar is acidic. This acidic nature makes it effective in loosening minerals deposited on the bathroom tiles without causing any damages to our fixtures. For this, we have to prepare a 50:50 solution of vinegar and water.

Then we have to warm the solution for few minutes and we can spray the solution on bathroom tiles, glass surfaces such as shower doors, sinks, floors, and bathtubs.

Vinegar can also be used to clean limescale from faucets and showerheads. To remove stubborn stains, soak a towel in vinegar and wrap it around the showerhead or tap for a few hours before cleaning it away with a cloth.

Vinegar should not be used to clean marble or natural stone floors because the acid in vinegar may cause further staining.

To begin, we can soak a cotton ball in vinegar and apply it to a tiny corner of the tile to conduct a surface test. Before rinsing it off, let it sit for 12 to 24 hours. If the tile’s appearance isn’t affected, we can go ahead and clean it with vinegar.

3. Baking Soda:

Baking soda works wonders to remove hard water stains from any floor (bathroom, kitchen etc) and wall tiles. It’s a safe and effective natural abrasive that may even be used on marble flooring.

Using a quarter cup of baking soda and some water, make a paste. Apply the paste with an old toothbrush to the afflicted region and leave for 12 hours before scrubbing and washing away the residue.

Baking soda should not be used to remove limescale from glass or ceramic surfaces because its abrasive action may damage these surfaces. The process is also called the Peroxide method.

4. Cream Of Tartar:

Cream of tartar, a weak acid that is widely used in baking, is a good substitute for baking soda. It works without abrasion to remove hard water stains from a variety of surfaces.

Apply a paste made of cream of tartar and water to the discolored area. Allow it to sit for up to 30 minutes before scrubbing the tiles with a moist towel to reveal gleaming tiles.

5. Lemon Juice:

To remove hard water stains from bathroom tiles, use lemon juice alone or in combination with salt, vinegar, and any of the other items listed above. Sprinkle salt over half of a lemon and rub it on the surface to remove mineral deposits from taps and showerheads.

6. Toothpaste

Using toothpaste is also a good solution to remove stains from bathroom tiles. Toothpaste contains fluoride. Fluoridated toothpaste is an excellent limescale fighter that may be used on glass, metal fixtures, tiles, and ceramic dishes without harming them.

Apply toothpaste to the stained area with an old toothbrush. Scrub in a circular manner for 30-45 minutes before wiping it away with a damp sponge or cloth.

7. Bleaching Powder

Bleaching powder contains chorine. Chlorines are considered one of the best bleaching agents.

It can be useful for removing several additional dangerous elements, such as moulds, yeasts, and bacteria, as well as certain other unwanted pathogens, in addition to tenacious chemical stains.

By utilizing it to clean your toilet tiles, you may fully eliminate them. When applying chlorine to the tiles, using a soft brush helps to maximize its effectiveness for this purpose.

8. Borax

If you want to get rid of hard water stains from your bathroom tiles, this naturally occurring mineral is an excellent alternative. This is due to its high alkaline content, which aids in the removal of stubborn watermarks.

It’s also antibacterial, so it’ll eliminate any microbes lurking in your bathroom. It will help remove any lingering odors from the bathroom and freshen the air inside.

1 gallon of water plus 1 cup of borax Then spray or wipe the solution on the marks on the stained bathroom tiles. Scrub the tiles with an old brush or sponge every now and again.

Conclusion

The longer minerals remain on a surface, the more difficult they are to remove, so it’s critical to act quickly and prevent them from forming in the first place. Installing a water softener is one of the most common strategies to avoid stains and damage caused by hard water.

There are two types of water softeners: whole-house softeners that go into the overhead water tank and point-of-use softeners for bathrooms or specific appliances and fixtures like washing machines and showers.

These softeners function by eliminating water’s mineralizing and calcifying qualities, extending the life of your equipment, and preventing the formation of stains.

So, I hope you can now easily remove stains from your bathroom tiles using the above methods. Do you know any other effective method to remove stains from bathroom tiles? Let us know in the comments.

Also Read –

How To Remove Stains From Marble

Standard Height Of Bathroom Fittings

How To Calculate Number Of Tiles In Room

If you like this article then please share it with your friends & also like our Facebook Page and join our Telegram Channel.

Leave a Comment

error: Content is protected !!