Dampness In Building – Causes, Effects & Prevention
What Is Dampness In Building? The presence of gravitational or hygroscopic moisture is known as dampness. One of the basic requirements of good construction is that a building or a…
Types Of Curb And Gutter
Curb and gutter are two different terms in construction. Many of us often get confused with them. In this article, we will discuss different types of curb and gutter, and…
Types Of Chicken Mesh For Plaster
What Is Chicken Mesh? Chicken mesh is a net like material formed by twisting two adjacent wires at least four times, forming a strong and durable honeycomb like mesh structure.…
Concrete Screed – Advantages & Application
What Is Concrete Screed? Concrete screeding is a process of applying a well-blended mixture of ordinary Portland cement, fine aggregates (sand), and water to hydrate cement mixture, to form a…
Types Of Construction Contract | What Is Contract?
What Is Contract? As per the Indian contract act 1872, A contract is defined as an agreement enforceable by law. Contract is derived from the Latin word “Contractum” which means…
Dry Pack Mortar – Advantages, Disadvantages & Application
What Is Dry Pack Mortar? Dry pack mortar, also known as deck mud or floor mud is a mixture of cement, sand, and water, in the required proportion. The consistency…
Ground Improvement Techniques And Methods For Soil
What Is Ground Improvement? Ground improvement is typically a method or technique used for the enhancement of ground which is in a poor condition or a disturbed state. Various geotechnical…
Construction Equipment List & Uses
Heavy Construction Equipment Every construction project involves earth-cutting, earth moving, hauling of excavated earth and other construction materials, concreting, and compaction equipment, etc. In small projects, manual labor with conventional…
Types Of Plaster Finishes Used In Construction
Plastering is one of the most important tasks done in almost every construction. It protects the interior/exterior surface as well as improves the aesthetics of a structure. In this article,…
Types Of Stone Used In Construction
Stone is one of the oldest materials used in construction since ancient times. Thousand of years ago, there was no cement and no concrete available. Stone was the only available…
Difference Between Brick Masonry And Stone Masonry
Difference Between Brick Masonry And Stone Masonry A construction made by using bricks or stone blocks with mortar is known as masonry. There are mainly two types of masonry i.e…
What Is Floor Space Index (FSI) Or Floor Area Ratio (FAR)?
Floor Space Index (FSI) or Floor Area Ratio (FAR) are two significant terms used in the field of real estate. In this article, we will discuss what is FSI or…
Ceramic Tiles – Types, Advantages And Disadvantages
What Are Ceramic Tiles? Ceramic tiles are made by mixing several materials like clay, sand, quartz, and water. Ceramic tiles are extensively used in places like houses, shops, restaurants, hotels,…
What Is Hempcrete | Properties, Advantages & Disadvantages Of Hempcrete
What Is Hempcrete? Hemp, popularly known as industrial hemp, is a plant from cannabis sattiva family. Hemp is specially and specifically grown for industrial applications. It is one of the…
Types Of Plaster In Building Construction
What Is Plaster And Plastering? The process of applying plastic mortar on the surfaces of rough ceilings, walls, etc in order to obtain an even, smooth, and clean surface is…
Types Of Glass Used In Construction
What Is Glass? Glass is an inorganic solid material that is usually found in transparent or translucent forms. Sometimes the glass is found in opaque form too. Glass is a…
Plate Load Test – Procedure, Safe Bearing Capacity Calculation
What Is Plate Load Test? Plate load test is a test conducted on the construction site itself to figure out the ultimate bearing capacity of soil and the anticipated settlement…
What Is Varnish | Types Of Varnish | Process Of Varnishing
What Is Varnish? Varnish is a resin-based solution used on wooden surfaces to provide a transparent, hard, and protective film. Most varnishes are a blend of resin, driers, and solvents.…
Difference Between Mortar And Grout | Mortar Vs Grout
Mortar and grout are two different products extensively used in the construction industry for brickwork and tiles. Both mortar and grout are cement-based products. Despite having cement as a base…
Quality Control Of Concrete Construction | Quality Assurance Of Concrete
What Is Quality Control Of Concrete? Concrete is one of the most important and widely used materials in the construction industry. Concrete consists of raw materials including cement, sand, aggregates,…
Construction Site Safety Checklist
What Is Construction Site Safety? Construction site safety includes all the procedures of safety that are in direct relation with the construction industry or construction sites. The main aim of…
Types Of Wood & Their Uses
Wood is a naturally occurring material. The main source of wood is trees. Different types of wood have different properties and different characteristics, which makes each one of them unique.…
Types Of Sand Used In Construction
What Is Sand? Sand is a material obtained naturally from locations like rivers, seas, beaches, and deserts. Sand is a granular material which consists of particles of finely divided rock.…
Thumb Rules Used In Construction – Civil Engineering
What Is Thumb Rule? Thumb rule is an approximate method for doing something. This particular method is based on the practicality of an activity rather than its theory, that’s why…