Alignment of Roads | Factors Controlling Highway Alignment
What Is Road Alignment? Road alignment is the position of layout of the center line of the highway on the ground. In simple words, road alignment is the direction through…
Concrete Screed – Advantages & Application
What Is Concrete Screed? Concrete screeding is a process of applying a well-blended mixture of ordinary Portland cement, fine aggregates (sand), and water to hydrate cement mixture, to form a…
Types Of Windows Used In Homes & Buildings
What Is Window? A window is defined as a vented barrier secured in a wall opening. A window’s main function is to allow the entry of air and light into…
Types Of Construction Contract | What Is Contract?
What Is Contract? As per the Indian contract act 1872, A contract is defined as an agreement enforceable by law. Contract is derived from the Latin word “Contractum” which means…
Dry Pack Mortar – Advantages, Disadvantages & Application
What Is Dry Pack Mortar? Dry pack mortar, also known as deck mud or floor mud is a mixture of cement, sand, and water, in the required proportion. The consistency…
Dog-legged Stair | What Is Dog-legged Staircase?
What Is Stair? A set of steps leading from one floor to the other, as a facility provided for vertical conveyance, is known as a stair. Stairs are provided to…
Difference Between Civil Engineer And Architect
Constructing a structure as small as a house to construct a structure as large as the Taj Mahal or Bandra-Worli sea link bridge is not an easy job. Without the…
Ground Improvement Techniques And Methods For Soil
What Is Ground Improvement? Ground improvement is typically a method or technique used for the enhancement of ground which is in a poor condition or a disturbed state. Various geotechnical…
How To Prevent Cracks In Concrete
What Is Concrete Crack? Cracking lines on the surface of the concrete may be found along which it has split without breaking apart. These lines are referred to as concrete…
Construction Equipment List & Uses
Heavy Construction Equipment Every construction project involves earth-cutting, earth moving, hauling of excavated earth and other construction materials, concreting, and compaction equipment, etc. In small projects, manual labor with conventional…
Permeability Test Of Concrete
What Is Permeability Of Concrete? Permeability is the ability of a given sample of concrete to permit liquids or gases to pass through it. It is the measurement of the…
Types Of Plaster Finishes Used In Construction
Plastering is one of the most important tasks done in almost every construction. It protects the interior/exterior surface as well as improves the aesthetics of a structure. In this article,…
Types Of Stone Used In Construction
Stone is one of the oldest materials used in construction since ancient times. Thousand of years ago, there was no cement and no concrete available. Stone was the only available…
Types Of Kitchen Layouts
In this article, we will discuss different types of kitchen layouts used in homes and other buildings. What Is Kitchen? Kitchen is a separate space or a special room in…
Road Gradient – Types & Factors Affecting Road Gradients
What Is Road Gradient? Road gradient is the rate of rise and fall along the length of road with respect to the horizontal. In simple words, it is the slope…
Difference Between Brick Masonry And Stone Masonry
Difference Between Brick Masonry And Stone Masonry A construction made by using bricks or stone blocks with mortar is known as masonry. There are mainly two types of masonry i.e…
What Is Floor Space Index (FSI) Or Floor Area Ratio (FAR)?
Floor Space Index (FSI) or Floor Area Ratio (FAR) are two significant terms used in the field of real estate. In this article, we will discuss what is FSI or…
Ceramic Tiles – Types, Advantages And Disadvantages
What Are Ceramic Tiles? Ceramic tiles are made by mixing several materials like clay, sand, quartz, and water. Ceramic tiles are extensively used in places like houses, shops, restaurants, hotels,…
What Is Hempcrete | Properties, Advantages & Disadvantages Of Hempcrete
What Is Hempcrete? Hemp, popularly known as industrial hemp, is a plant from cannabis sattiva family. Hemp is specially and specifically grown for industrial applications. It is one of the…
Concrete Resurfacing – How To Resurface Concrete [Step By Step]
Concrete resurfacing is a very useful method to recreate old concrete. In this article, we will briefly discuss, what is concrete resurfacing, its techniques, materials used, advantages and disadvantages of…
Valuation Of Building | Methods And Calculation Of Valuation Of Property
Value means the worth of something or someone. When it is said that the value of something is “x”, the “x” refers to the worth of that particular thing, maybe…
Types Of Plaster In Building Construction
What Is Plaster And Plastering? The process of applying plastic mortar on the surfaces of rough ceilings, walls, etc in order to obtain an even, smooth, and clean surface is…
Types Of Glass Used In Construction
What Is Glass? Glass is an inorganic solid material that is usually found in transparent or translucent forms. Sometimes the glass is found in opaque form too. Glass is a…
Plate Load Test – Procedure, Safe Bearing Capacity Calculation
What Is Plate Load Test? Plate load test is a test conducted on the construction site itself to figure out the ultimate bearing capacity of soil and the anticipated settlement…